Experimental research of parts vibratory alignment with remote center compliance device

Bakšys, B.; Chadarovicius, A.; Pilkauskas, K.

Journal of Vibroengineering

Browse Journal

Submit article

Published: 30 June 2009

Check for updates

Experimental research of parts vibratory alignment with remote center compliance device

B. Bakšys¹

A. Chadarovicius²

K. Pilkauskas³

Cite the article

Downloads 0

About this article

Received

Accepted

Published

30 June 2009

This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Previous article in issue Previous Next article in issue Next

Research article

2023 11 21

Kinematics design and statics analysis of novel 6-DOF passive vibration isolator with S-shaped legs based on Stewart platform

Minh Hung Vu, Ngoc Pham Van Bach, Thien Nguyen Luong, Thanh Bui Trung

Research article

2023 09 21

Practical implementation and experimental testing of control system for vibratory lapping-polishing machine

Oleksandr Kachur, Vitaliy Korendiy, Viktor Zakharov, Volodymyr Borovets, Oleksandr Havrylchenko, Roman Palash

Research article

2019 09 30

Experimental setup for unbalance fault detection and vibration analysis in a cardan shaft (Part B)

Bernard Xavier Tchomeni, Alfayo Anyika Alugongo, Leonard Masu

Research article

2019 06 07

Complex condition monitoring for industrial equipment via remote strain gauge diagnostics and vibration isolating metamaterials

Anvar Valeev

Experimental research of parts vibratory alignment with remote center compliance device

About this article

Related Articles